N Connector

  • N Flange Jack Solder Receptacle
  • N Flange Jack Solder Receptacle
    Drawing No.: DS3.650.256
    In addition to brass body and PTFE dielectric, this solder connection N flange jack also incorporates a nut, an O ring, and 4 holes. With 50ohms impedance, it is tri-alloy plated.
  • N Flange Jack Solder Receptacle
  • N Flange Jack Solder Receptacle
    Drawing No.: DS3.650.510
    This range of N flange jack supporting solder connection includes four models, and is designed with 4 holes, a brass body, and a PTFE dielectric. It is tri-alloy plated, and has 50ohms impedance.
  • N Flange Jack Solder Receptacle
  • N Flange Jack Solder Receptacle
    Drawing No.: DS3.650.275
    This range of N flange jack supporting solder connection includes four models, and is designed with 4 holes, a brass body, and a PTFE dielectric. It is tri-alloy plated, and has 50ohms impedance.
  • N Flange Jack Solder Receptacle
  • N Flange Jack Solder Receptacle
    Drawing No.: DS3.650.455
    This range of N flange jack supporting solder connection includes four models, and is designed with 4 holes, a brass body, and a PTFE dielectric. It is tri-alloy plated, and has 50ohms impedance.
  • N Flange Jack Solder ReceptacleN Flange Jack Solder Receptacle
  • N Flange Jack Solder Receptacle
    Drawing No.: DS3.650.035
    Total length: 61mm
    This range of N flange jack supporting solder connection includes four models, and is designed with 4 holes, a brass body, and a PTFE dielectric. It is tri-alloy plated, and has 50ohms impedance.
  • N Jack Solder
  • N Jack Solder
    Drawing No.: DS3.650.442
    The N jack solder with 50ohm impedance is tri-alloy plated, and incorporates a brass body, a PTFE dielectric, and an O ring.
  • N Type Crimp Jack
  • N Type Crimp Jack
    Drawing No.: DS3.650.053
    The N type crimp jack with 75ohm impedance is designed for RG316 and RG174 types of cable. It is nickel plated, and has a body made of brass, and a dielectric made of PTFE.
  • N Type Crimp Plug
  • N Type Crimp Plug
    Drawing No.: DS3.650.570
    Length: 27.5mm
    Cable Type: RG58, SYV-50-3
    Plating: nickel plated
    All the four types of N type crimp plugs are designed with a brass body and a PTFE dielectric.
  • N Type Crimp Plug
  • N Type Crimp Plug
    Drawing No.: DS3.650.629
    Length: 25mm
    Cable Type: RG58, SYV-50-3
    Plating: nickel plated
    All the four types of N type crimp plugs are designed with a brass body and a PTFE dielectric.
  • N Type Crimp Plug
  • N Type Crimp Plug
    Drawing No.: DS3.650.239
    Cable Type: LMR400
    Plating: Ternary alloy plated
    All the four types of N type crimp plugs are designed with a brass body and a PTFE dielectric.
  • N Type Crimp Plug
  • N Type Crimp Plug
    Drawing No.: DS3.650.251
    Cable Type: LMR600
    Plating: Ternary alloy plated
    All the four types of N type crimp plugs are designed with a brass body and a PTFE dielectric.
  • N Right Angle Plug
  • N Right Angle Plug
    Drawing No.: DS3.650.513
    Cable Type: RG58
    Connection method: Crimping
    Plating: Nickel plated
    Body: Brass body
    Dielectric: PTFE dielectric
  • N Crimp Bulkhead Jack
  • N Crimp Bulkhead Jack
    Drawing No.: DS3.650.590
    Cable Type: RG178
    IP grade: IP68 (waterproof)
    Plating: Nickel plated
    Body: Brass body
    Dielectric: PTFE dielectric
Feedback Form
Other Products
  • FC Connector The FC connector provides an ideal solution to connect a cable to a PCB board, and can satisfy users’ varied application demands.
    ...
  • SWP ConnectorThe SWP connection with subminiature structure design is an upgrade version of conventional RF coaxial connector. It features very small size, light weight, easy use, and good electrical performance. It provides an ideal solution for cable connection, as well as the connection between RF modules ...